51 16 178 Removing and Installing (Replacing) Side Clip At Centre Console

51 16 178 Removing and installing (replacing) side clip at centre console

Special tools required:







When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).







Necessary preliminary work:
- Remove centre console cover
- Remove side trim on centre console (passenger side).
- Remove side trim panel (carpet) on centre console (passenger side)







Release screws (1) from side clip (2) inside and outside.
Tightening torque 51 16 25AZ.
Slightly raise the rear side clip (2) and slide forward until the side clip (2) detaches from the front top of the hook (3).







Tilt the side clip (1) to the side and release and remove the plug connections (2).
Remove side clip (1).







Replacement
- Modify controller (1)
- Modify drinks holder / ashtray (2)

f D�E D: