Convertible Top Deck Lid Motor: Service and Repair
54 34 820 Removing and installing kinematics box (locking device)
Necessary preliminary tasks:
- Open the tailgate, unclip the emergency release button on the left and right and pull off the Bowden cable.
Open convertible top compartment lid until all hydraulic cylinders are completely extended.
Support soft top compartment lid in service position
Release screws (1).
Tightening torque 54 34 28AZ.
Remove kinematics box.
Remove snap ring (1).
Pull off Bowden cable nipple.
NOTE: Do not undo nuts in marked area (2).
Replacement only:
- Remove hydraulic cylinder for convertible top compartment lid