51 71 120 Removing and Installing/Replacing Cowl Panel Seal

51 71 120 Removing and installing/replacing cowl panel seal







Necessary preliminary tasks:
- If necessary, open soft top
- Remove both trim strips on water channel








NOTE: The operation is described on the left side; proceed in the same way for the right side.

Pull back tab (1) and release screw (2) underneath.

Installation note:
Water drainage channel (3) must not be clogged.







Detach seal (1) in direction of arrow from window frame.

Installation note:
If necessary, moisten seal (1) with water for better fitting.