54 34 441 Replacing Top Angle-of-Rotation Sensor

54 34 441 Replacing top angle-of-rotation sensor







Open convertible top compartment lid until all hydraulic cylinders are completely extended.
Support soft top compartment lid in service position







Disconnect plug connection (3).
Disconnect cable strap at the soft top frame.
Release screws (1).
Tightening torque 54 34 03AZ.
Remove angle-of-rotation sensor (2).







Teach-in soft top:
1. Close soft top.
2. Only in vehicles built before 09/2011: Briefly release the lock button (less than 5 seconds).
3. Operate closing button for 30 seconds (until LED flashes - LED flashes to indicate that the teach-in procedure is complete)
4. Release closing button.

�c�
: