Power Trunk / Liftgate Lock Switch: Service and Repair

51 24 146 Removing and installing/replacing button for rear lid actuation







Necessary preliminary tasks:
- Remove trim for rear lid

Version with reversing camera:
- Remove reversing camera







Release and disconnect plug connection (1) at microswitch.
Slacken screws (2) until circlip (3) can be twisted.
Tightening torque 51 24 16AZ.
Turn circlip (3) in the direction of arrow and remove.







Remove button (1) from tailgate (2) in direction of arrow.







Installation note:
Perform function check with tailgate open.

Replacement:
Install BMW badge.

e@�: