Harmonic Balancer - Crankshaft Pulley: Service and Repair

11 23 010 Removing And Installing/Replacing Vibration Absorber (N55)

Special tools required:







Necessary preliminary work:
- Remove underbody protection
- Remove drive belt.







NOTE: Engine removed:

Block crankshaft with special tool 11 9 260.

NOTE: Picture of flywheel removal.







NOTE: Engine installed with manual gearbox:

Block crankshaft with special tool 11 8 180.







NOTE: Engine installed with automatic transmission:

Block crankshaft with special tool 11 8 660.







IMPORTANT:
Do not release central bolt.
If the central bolt is accidentally loosened, the timing must be readjusted.







Release screws (1 to 8).
Remove vibration absorber (1)
Screws on vibration absorber
Tightening torque 11 23 1AZ.







Assemble engine.