Oil Line: Service and Repair

17 22 030 Removing And Installing/Replacing Oil Line For Engine Oil Cooler (N55)







WARNING:
Risk of scalding.
Only perform this work after engine has cooled down.







IMPORTANT: Wear protective gloves and safety goggles.







Recycling:
Engine oil escapes when oil line is released.
Catch and dispose of emerging engine oil.
Observe country-specific waste disposal regulations.







Necessary preliminary work:
- Remove fan cowl
- Remove front right wheel arch panel







Release screw (1).
Tightening torque 17 22 4AZ.
Detach oil lines from oil filter housing.
Catch and dispose of emerging engine oil.







Unscrew nut (1).
Tightening torque 17 22 5AZ.







Unlock oil lines (1) and detach from engine oil cooler flange.
Catch and dispose of emerging engine oil.
Release clamp (2).
Feed out engine oil line and remove.







Installation note:
Replace sealing rings on engine oil lines.







NOTE:
After completion of work, check oil level.
Top up engine oil, if necessary.