12 14 524 Replacing Exhaust Camshaft Pulse Generator

12 14 524 Replacing Pulse Sensor On Exhaust Camshaft (N55)







IMPORTANT:
Aluminium screws/bolts must be replaced each time they are released.
Aluminium screws/bolts are permitted with and without colour coding (blue).
For reliable identification:
Jointing torque and angle of rotation must be observed without fail (risk of damage).







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Necessary preliminary work:
- Read out the fault memory of the DME control unit.
- Switch off ignition.
- Remove fan cowl.







Release connector (1) and remove.
Release screw.
Tightening torque 13 62 1AZ.
Remove pulse sensor (2).







NOTE:
Check stored fault message.
Delete fault memory.