65 77 534 Removing and Installing/Replacing Front Right Sensor (Acceleration Sensor)

65 77 534 Removing and installing/replacing front right sensor (US version only)







Necessary preliminary tasks:
- Remove front right wheel arch cover







Release screw (1) on auxiliary radiator holder (2).
Remove auxiliary radiator holder (2) and carefully place to one side.

Installation note:
Auxiliary radiator holder (2) must be correctly seated in the designated guides.







Release screw (1) on air duct (2).







Fold air duct (4) to one side.
Release screws (3).
Tightening torque 65 77 2AZ.
Feed out sensor (1).
Unfasten plug connection (2) and disconnect.

Installation note:
Make sure sensor (1) is in correct installation position.
Sensor surface must point upwards.
Plug connection (2) must point in opposite direction to direction of travel.