63 31 ... Removing and Installing/Replacing Front Left or Right Top Door Trip Panel Fibre Optic Conductor

63 31 ... Removing And Installing/Replacing Front Left Or Right Top Door Trip Panel Fibre Optic Conductor

Special tools required:







WARNING: Fibre optic conductors are sensitive (risk of damage). Always handle carefully.







Necessary preliminary work:
- Remove front door trim panel
- Work station with cleaner working surface







Top fibre optic conductor below decorative strip
Use special tool 64 1 020 to unclip fibre optic conductor (2) from door trim panel (1) at the fastening clips (3) with light rotating movement.

Installation note:
Make sure fibre optic conductor (1) correctly locks at fastening clips (3).







A. Pull LED module (1) out of bracket (2).
B. Carefully pull LED module (1) from optical fibre (2).

Installation note:
LED module (1) must lock into position (light distribution).







Feed fibre optic conductor (1) out of door trim panel (2) in direction of arrow and remove.







Installation note:
Check fibre optic conductor (1) for damage (scratches or cracks), replace if necessary.