31 12 003 Removing and Installing/Replacing Top Right Wishbone

31 12 003 Removing And Installing / Replacing Top Right Wishbone







NOTE:
Wishbones with + or - marking (see graphic) are camber correction arms:
- Under dimension variant
+ Over dimension variant

These camber correction arms are used to correct the camber values by 30 minutes. To be used only if the tolerance values are exceeded or undershot.
An unmarked wishbone is a standard part.







Necessary preliminary tasks:
- Remove front wheel.
- Remove air duct to intake silencer housing. (Only N63)
- Remove suction filter housing. (Only N74)
- N47, N53, N54, N57, N63, N74: remove right electronics box on wheel arch.
- N52T: Remove expansion tank for coolant on right wheel arch.







IMPORTANT: The spring strut/lower wishbone screw connection does not have to be released.







Further procedure is identical to:
- Removing and installing/replacing top left control arm.