33 32 051 Removing and Installing/Replacing Left or Right Push Rod/Integral Link

33 32 051 Removing And Installing/Replacing Left Or Right Anti-roll Bar Link/Integral Link







NOTE: If the integral link is detached from the swinging arm, it is necessary after installation to carry out a chassis / wheel alignment check.







Necessary preliminary work:
- Remove rear wheel.







Release nut (1) and remove screw.
Tightening torque 33 32 4AZ.
Release screw (2) and remove integral link (3).
Tightening torque 33 32 5AZ.

Installation note:
Replace screw and nut.
Tighten screw connections in normal position.







After installation:
- Perform chassis / wheel alignment check

���� �: