24 2 310 Tool Kit for Removing and Installing Reverse Gear Piston

24 2 310 Device

0493156

MW







NOTE: (Device) Tool set for dismantling and fitting the R gear piston. For dismantling and assembling the transmission for "Sealing the intermediate plate".

SI number: 01 22 97 (239)

Consisting of:

1 = 0493157 Plate

NOTE: (Pressure plate) For removing and installing the spring cup

2 = 0493158 Spindle

NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer / For removing and installing the spring cup

3 = 0493159 Pin

NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case

4 = 0493160 Bush

NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate