54 34 310 Removing and Installing/Renewing Gasket For Rear Window
54 34 310 Removing and installing/renewing gasket for rear window
Open soft top compartment until all hydraulic cylinders are extended.
Support soft top compartment lid in service position
Gasket on the rear window module:
Release left and right screws (1).
Remove cover (2) on left and right.
Installation note:
Tightening torque 54 34 06AZ.
Release left and right screws (1).
Pull gasket off upwards from rear window module.
Installation note:
Tightening torque 54 34 08AZ.
Installation note:
Gasket (2) must be pressed in line with the rear window (1) in front of the screws.