Rear Door Window Regulator: Service and Repair

51 37 000 Removing and installing complete rear left or right power window regulator







Necessary preliminary tasks:
- Remove inner weather strip







Release screws (1).
Tightening torque 51 37 3AZ.
Raise the power window regulator (2) slightly and detach cable clip (3).
Move side window to the uppermost end position.







Remove cover (1) and slacken underlying screw (2).
Tightening torque 51 37 4AZ.
Feed out cable clip (3).







Pull out power window regulator (1) towards top slightly.
Lift out cable holder (2) from power window regulator (1).
Disconnect plug connection (3).
Remove power window regulator (1).

Installation note:
Run a function check.
Adjust rear door window.