63 21 180 Removing and Installing/Replacing Left or Right Rear Light (In Side Wall)

63 21 180 Removing and installing/replacing left or right rear light (in side wall)







IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).







Remove plugs (1) and release the nuts below them on the rear light.
Tightening torque 63 21 2AZ.







Pull out rear light (1) slightly in direction of arrow.







Unfasten plug connection (1) and disconnect.
Remove rear light.







Installation note:
Seals (1) and guide (2) must not be damaged or missing.







Installation note:
Rear light guide (1) must be correctly engaged in bush (2) when installed.