Tire Pressure Monitoring System

Resetting The System (TPMS)

Reset the system after each correction of the tire inflation pressure and after every tire or wheel change.

1. "Vehicle Info"

2. "Vehicle status"

Fig. 1:

3. "Reset TPM" see Fig.1

4. Start the engine - do not drive away.

5. Reset the tire presssure using "Reset".

6. Drive away.

The tires are shown in gray and "Resetting TPM...." is displayed.

After driving for a few minutes, the set tire inflation pressures are applied as set values. The resetting process is completed automatically during driving. The tires are shown in green and "TPM Active" is shown on the Control Display.

The trip can be interrupted at any time. If you drive away again, the process resumes automatically.

If a flat tire is detected during a reset, all tires are displayed in yellow.