Engine Valley Cover: Description and Operation

11 14 250 Removing And Installing/Sealing Rear Coolant End Cover (N63)

Special tools required:







WARNING:
Risk of scalding.
Only perform this work after engine has cooled down.







Recycling:
Catch and dispose of drained coolant in a suitable collecting vessel.
Observe country-specific waste disposal regulations.







Necessary preliminary work::
- Remove flywheel
- Drain coolant







Release all screws in area (1).
Tightening torque 11 14 5AZ. 00 00 Excerpt From Company Standard BMW GS 90003-2
Remove end cover.

NOTE: Clean sealing surfaces with special tool 11 4 470.







Installation note:
Replace profile seal (1).







Assemble engine.