Instrument Cluster / Carrier: Service and Repair

62 11 280 Removing and installing/replacing instrument cluster

Special tools required:







IMPORTANT: Comply with notes on protection against electrostatic damage (ESD protection).







Necessary preliminary work:
- Disconnect battery ground cable
- Move steering column completely towards rear
- If necessary, tape off cover to protect against damage







Insert special tool 64 1 030 in each case in second slot, on left and right, of instrument cluster (2).
Feed special tool 64 1 030 into clamp (1) and pull downward.
Feed out instrument cluster (2) in direction of arrow.







Disconnect plug connection (1) and remove instrument panel (2).







Installation note:
Retaining tabs (1) of dashboard (2) must be exactly seated in mountings of dashboard.







Replacement:
Carry out vehicle programming/encoding.
Check values for Condition Based Service (CBS) and correct if necessary.
If necessary, adjust Head-Up Display.