33 1 300 Extractor

33 1 300 Extractor

0492096

MW






NOTE: (Rillex extractor) For bevel pinion and differential case (rear diff) / for installation of camshaft sprocket on crankshaft (M70) / for removing bearing inner race from drive flange (E36, E46)

Storage Location: B6
C6

Consisting of:

1 = 0492097 Connector

NOTE: (Basic body) For transmissions S5D 260Z, S5D 310Z and S5D 320Z;Discontinued, only available via complete tool

2 = 0492098 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

3 = 0492099 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

4 = 0492100 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

5 = 0492101 Synchronizing key

NOTE: (Thrust piece (old))Discontinued, only available via complete tool

6 = 0492102 Synchronizing key

7 = 0492103 Synchronizing key

NOTE: Discontinued, only available via set

8 = 0492104 Synchronizing key

9 = 0492105 Synchronizing key

NOTE: For rear axle differential and for installing the camshaft sprocket on the crankshaft (M70)Discontinued, only available via complete tool

1 = 0492107 Washer

NOTE: (Disc) Discontinued, only available via complete tool

2 = 0492108 Synchronizing key

NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5 Discontinued, only available via complete tool