66 54 005 Removing and Installing/Replacing Control Unit For Night Vision System

66 54 005 Removing and installing/replacing control unit for Night Vision System







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Necessary preliminary work:
- Disconnect battery cable
- Remove side panel on left dashboard







Unlock plug connections and disconnect.
Release bolt (1) and remove control unit (2) in direction of arrow.







Installation note:
Guides (1) on control units (2) must be correctly seated in the applicable bracket.







Replacement:
Carry out vehicle programming/encoding.

NOTE:
New component contains a CD with deblocking code.
CD is requested during encoding/programming by the SSS.