Differential Assembly: Adjustments

33 00 ... Rear Axle: Wheel Alignment Check Must Be Carried Out After The Following Work







Graphic F01/F02.

A wheel alignment check must be carried out after the following work:
- Release the following screw connection:
- Swinging arm, front/rear, to rear axle support
- Swinging arm to integral link / wheel carrier
- Guide arm to rear axle support / HSR unit
- Wishbone to rear axle support / wheel carrier

- Replacement of following parts:
1. Rear axle support
2. HSR actuator
3. Toe arm
4. Swinging arm
5. Wheel carrier
6. Integral link
7. Wishbone