33 32 180 Removing and Installing/Replacing Left or Right Toe Arm

33 32 180 Removing And Installing/Replacing Left Or Right Toe Arm







NOTE: If the toe arm is detached from the rear axle support, it will be necessary to carry out a wheel alignment procedure after assembly.







Necessary preliminary work:
- Remove rear wheel.







F01, F02:
Release nut (1) and remove heat shield (2).
Tightening torque 33 32 10AZ. 00 00 Excerpt From Company Standard BMW GS 90003-2

Installation note:
Replace self-locking nut.







Remove cable holder (1) from toe arm, if applicable.

Installation note:
Replace faulty cable clips.







Release screw (1).
Tightening torque 33 32 6AZ.
Pull out bolt (1) and remove toe link (2).

Installation note:
Tighten down screw connection in normal position.







Slacken nut (1).
Tightening torque 33 32 7AZ
Remove toe link (2) from wheel carrier.

Installation note:
Insert toe link (2) first in wheel carrier.
Keep toe link to wheel carrier connection clean and free from oil and grease.
Replace nut.







After installation:
- Carry out wheel alignment procedure.

���� �: