11 65 010 Removing and Installing/Replacing Pressure Accumulator

11 65 010 Removing and installing/replacing pressure accumulator (N63)





Necessary preliminary work:
^ Remove both exhaust turbochargers
^ Remove both exhaust manifolds
^ Remove heat shield at bottom





Release banjo bolt (1).

Tightening torque 11 42 3AZ.

Installation note:
Replace sealing ring.

Release screw (3) on engine oil line.

Remove engine oil line (2).

Release screws (3) on vacuum reservoir (4).

Tightening torque 11 65 6AZ.

Remove vacuum reservoir (4).





Check vacuum connections for correct routing.

Check vacuum system for leaks.

Assemble engine.