13 62 592 Removing and Installing/Replacing Pressure Sensor on Right Intercooler

13 62 592 Removing and Installing / Replacing Pressure Sensor For Charge Air on Right (N74)







Necessary preliminary tasks:
- Read out fault memory of DME control unit.
- Turn off ignition
- Remove right intake filter housing







NOTE: Graphic shows the left side, the procedure for the right side is identical.

Release clamp (1).
Tightening torque 13 71 5AZ.
Remove hose supports (2).







NOTE: Graphic shows the left side, the procedure for the right side is identical.

Release screws (1).
Tightening torque 13 62 7AZ.
Unlock plug (3) and remove.
Pull pressure sensor (2) out of right charge air duct.
Remove pressure sensor (2).

Installation:
Replace sealing ring on pressure sensor.







Installation:
Assemble engine.
Delete fault memory.