33 32 051 Removing and Installing/Replacing Left or Right Push Rod/Integral Link

33 32 051 Removing and installing/replacing left or right anti-roll bar link/integral link





Note:
If the integral link is detached from the swinging arm, it is necessary after installation to carry out a chassis / wheel alignment check.





Necessary preliminary work:
^ Remove rear wheel.





Release nut (1) and remove screw.

Tightening torque 33 32 4AZ.

Release screw (2) and remove integral link (3).

Tightening torque 33 32 5AZ.

Installation note:
Replace screw and nut.

Tighten screw connections in normal position.





After installation:
^ Perform chassis / wheel alignment check

#"°,�T°,:

�°,z�°,: