Removing and Installing/Replacing Lower Oil Sump Section

11 13 020 - Removing and installing/replacing lower oil sump section (N63)





Necessary preliminary tasks:
- Remove underbody protection at front and rear
- Remove oil drain plug and drain engine oil.





Unlock plug connection (1) on oil level sensor and disconnect.
Release screws (2) along line.
Tightening torque 11 13 2AZ .
Remove lower oil sump section (3).

Installation:
Clean sealing surfaces.
Replace seal.
Replace screws.

When replacing oil sump bottom section:

Convert oil level sensor.
Replace sealing ring.