32 00 ... Test Conditions For Chassis/Wheel Alignment Check

32 00 ... Test Conditions For Chassis/Wheel Alignment Check

Observe the following test conditions prior to the chassis/wheel alignment check:
1. Only BMW approved wheel and tyre combinations may be installed on the vehicle
2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
3. Correct tyre pressure (see label on vehicle).
4. All chassis and suspension components must be technically OK.
5. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
6. Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.