61 14 010 Removing and Installing/Replacing Distribution Box (on Battery)

61 14 010 - Removing and installing/replacing distribution box (on battery)





Warning!
Observe safety instructions Technician Safety Information for handling vehicle battery.





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead





Release screws (1) and remove bracket (2). Tightening torque 61 14 1AZ .





Disconnect plug connection (1).
Fold back cover (3).
Slacken nut (2). Tightening torque 61 21 2AZ .
Fold back cover (5).
Slacken nut (4). Tightening torque 61 21 2AZ .





Press locking brackets (1) downwards and unclip.
If necessary, using a screwdriver, expand locking bracket (1) at lower end and clip out.
Remove distribution box (2) towards top.