Starter Motor: Service and Repair

12 41 020 - Removing and installing/replacing starter (S65)





Necessary preliminary tasks:
- Switch off ignition
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead and cover
- Remove intake air manifold Service and Repair
- Remove idle actuator 13 41 550 Replacing Idle Actuator
- Remove throttle valve actuating motor 13 62 540 Removing and Installing/Replacing Throttle Valve Actuating Motor on left





Remove idle actuator mounting.





Unlock plug (1) and remove.
Unfasten nut.
Tightening torque 12 41 1AZ .
Remove battery positive lead (2).





Release screw (1).
Release screws (2).
Tightening torque 12 41 2AZ .
Pull starter motor out of transmission mount and remove.






Installation Note:
Check starter pinion and ring gear for damage, replace damaged parts if necessary.

Add final details to vehicle.