Campaign 601 - 2012 CIC Navigation Road Map Database
SI B65 18 11Audio, Navigation, Monitors, Alarms, SRS
January 2012
Technical Service
This Service Information bulletin supersedes SI B65 18 11 dated December 2011.
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.
[NEW] designates changes to this revision
SUBJECT
Service Action: CIC - Install Navigation Road Map Database 2012
MODEL
All applicable vehicles with option 609 (Navigation System Professional, CIC)
SITUATION
Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2012 must be installed onto the CIC internal Hard Disc Drive (HDD).
Note:
The INITIAL enabling code "FSC CIC map, N. America 2012 INITIAL" is necessary to start the installation process and to activate the road map database.
AFFECTED VEHICLES
This Service Action involves E82, E88, E89, E90, E91, E92, E93, F01, F02, F04, F07, F10, F12, and F13 vehicles which were produced from October 1, 2011 to November 15, 2011 and E70, E71, and F25 vehicles which were produced from October 15, 2011 to November 15, 2011.
In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar label for code number 601.
If code number 601 has been punched out, the campaign has already been performed.
If code number 601 has not been punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader.
Based on the response of the system, either proceed with the corrective action or take no further action.
[NEW] PROCEDURE
Check the installed road map database using the key reader SAM application.
1. If the key reader SAM application shows: Road Map North America Premium 2012 or 2013.
No further action is required.
2. If the key reader SAM application shows: Road Map North America Premium 2011, 2011i OR 2011ii. Refer to the attached Installation Procedure.
PARTS INFORMATION
IMPORTANT:
The two (2) reusable USB Flash Drive sticks with the CIC navigation road map database 2012, which got shipped to every BMW center through the Automatic Tool Shipment Program cannot be reordered!
LABEL INSTRUCTIONS
This Service Action has been assigned code number 601. After the vehicle has been checked and/or corrected, obtain a label (SD 92-403) and:
A. Emboss your BMW center warranty number in the middle of the label (1);
B. Punch out code number 601 (2), printed on the label; and
C. Affix the label to the B-pillar as shown.
If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on top of another one, because a number from an underlying label could appear in the punched-out hole of the new label.
[NEW] WARRANTY INFORMATION
ATTACHMENT