61 35 107 Removing and Installing/Replacing Junction Box Electronics

61 35 107 - Removing and installing or replacing junction box electronics





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) .





Necessary preliminary tasks:
- Clamp off battery negative lead
- Remove trim for instrument panel , bottom right





Unfasten plug connection (1) and disconnect.
Release screw (2).
Fold down passenger compartment fuse box (3) in direction of arrow.





Unlock plug connections (1) and disconnect.
Release screws (2) and pull junction box electronics (3) out of holder in direction of arrow.

Installation Note:
Make sure junction box electronics (3) are correctly seated.





Replacement:
Carry out vehicle programming/coding .
Delete transport mode.