Front Fender: Service and Repair

41 35 081 Removing And Installing Front Side Panel On Left







For stripping and rigging operations, refer to texts on KSD CD (job number 41 35 081).
Observe gap dimensions.







Attention:
Do not damage adjoining body components.







Necessary preliminary work:
- Remove trim panel for cover on side member
- Release bumper panel at the side in the area of the wheel arch cover







Lever out expanding rivets (1).
Release latch mechanism (2) and remove cover (3).







Loosen screws and remove side wall.
Tightening torque 41 35 1AZ.







Replacement:
- Apply additional sealant to inside of front panel in area (1) analogous with series. Material: Sealant D1 (sourcing reference via BMW Parts Department).
- Modify holder (2).