Antenna Assembly Replacement - Cellular and Navigation
ANTENNA ASSEMBLY REPLACEMENT - CELLULAR AND NAVIGATIONREMOVAL PROCEDURE
1. Remove the windshield garnish molding.
2. Remove the sunshade from the headliner.
3. Remove the door edge molding from the door opening.
4. Lower the front corner of the headliner.
5. Disconnect the wire harness from the roof antenna.
6. Remove the antenna nut.
7. Remove the antenna from the roof.
INSTALLATION PROCEDURE
1. Attach the antenna base to the roof and fasten the antenna nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 2 N.m (18 lb in).
2. Connect the electrical connector to the antenna.
3. Push the headliner back into place.
4. Attach the sunshade to the headliner.
5. Attach the windshield garnish molding.