Cellular Phone: Service and Repair
ONSTAR BUTTON ASSEMBLY REPLACEMENTREMOVAL PROCEDURE
1. Remove the overhead console door (3).
2. Reach your hand through the access opening and disconnect the electrical connectors (1) for the switches.
3. Remove the OnStar(R) button assembly (2).
INSTALLATION PROCEDURE
1. Reach your hand through the access opening in order to install the OnStar(R) button assembly (2) and connect the electrical connectors (1).
2. Install the overhead console door (3). Install the screws securing the overhead console door.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 10 N.m (89 lb in).