Trim Plate Replacement - Front Floor Console

Trim Plate Replacement - Front Floor Console (Rendezvous)

Removal Procedure

1. Lift the armrest cover and place the cover in the locked position.




2. Remove the armrest cover screws.
3. Remove the cup holder liners.
4. Remove the cup holder screws.
5. Remove the power accessory liner.
6. Remove the liner screws.
7. Disconnect the electrical connectors from the trim plate.
8. Remove the trim plate assembly.



Installation Procedure





1. Connect the electrical connectors to the trim plate.
2. Install the trim plate assembly.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the trim plate screws.

Tighten the screws to 2 N.m (18 lb in).

4. Install the cup liners.
5. Install the power accessory liners.
6. Close the armrest cover.