Power Accessory Receptacle Replacement - Floor Console

ACCESSORY POWER RECEPTACLE REPLACEMENT - FLOOR CONSOLE

TOOLS REQUIRED
J 42059 Cigarette Lighter Socket Remover

REMOVAL PROCEDURE
1. Remove the power accessory port fuse.




2. Remove the power accessory port socket by placing one side of J 42059 into the tab window and angle the other side into the opposite tab window. Pull the power accessory port socket straight out.
3. Remove J 42059 from the power accessory port socket.




4. Disconnect the electrical connector from the front floor console power accessory port.




5. Remove the power accessory port retainer using your index finger and pulling out.

INSTALLATION PROCEDURE




1. Position the power accessory port retainer with the key to the slot into the power accessory port hole.




2. Install the power accessory port retainer pressing into place until fully seated.




3. Connect the electrical connector to the front floor console power accessory port.




4. Position the power accessory port to the retainer.




5. Install the power accessory port into the front floor console pressing into place until fully seated.
6. Install the power accessory port fuse.
7. Inspect the power accessory port for proper operation.