Lock Replacement - Front Door

LOCK REPLACEMENT - FRONT DOOR

REMOVAL PROCEDURE
1. Remove the trim panel.
3. Remove the inside handle rods from the front door inside handle.



4. Disconnect the clip securing the outside handle rod to the front door lock.




5. Remove the screws from the front door lock.




6. Disconnect the electrical connectors from the lock.




7. Remove the lock with the inside handle rods attached to the lock through the access hole in the front door inner panel.




8. Remove the inside handle rods from the lock.

INSTALLATION PROCEDURE




1. Install the inside handle rods to the lock.




2. Install the lock in the position through the access hole in the front door inner panel.




3. Connect the electrical connectors to the front door lock.




4. Install the lock screws to the front door lock.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the lock screws to 10 N.m (89 lb in).




5. Connect the clip securing the outside handle rod to the front door lock.
6. Install the door handle rods to the inside door handle.
7. Install the water deflector.
8. Install the front door trim panel.
9. Inspect the door lock system for the proper operation.