Bucket

SEAT BACK REPLACEMENT - REAR (BUCKET)

REMOVAL PROCEDURE
1. Remove the rear bucket seat.
2. Remove the outer trim panel from the rear seat cushion
3. Remove the inner trim panel from the rear seat cushion.




4. Remove the bolts from the seat back recliner hinges.




5. Remove the seat back from the seat cushion.

INSTALLATION PROCEDURE




1. Place the rear seat back to the rear seat cushion frame.




2. Install the bolts to the seat back recliner hinges.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 40 N.m (30 lb ft).

3. Install the outer trim panel to the rear seat cushion.
4. Install the inner trim panel to the rear seat cushion.
5. Inspect the seat back for proper operation.
6. Install the rear bucket seat.