Lumbar Adjuster Plate Replacement - Manual

Lumbar Adjuster Plate Replacement - Manual

Removal Procedure

1. Remove the front bucket seat. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .
2. Remove the outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Seat Cushion Outer Trim Panel Replacement - Front Seat) .





Important: The lumbar support must be in the relaxed position to disconnect the lumbar support cable.


3. Remove the lumbar control cable from the lumbar control.




4. Remove the screws from the lumbar control.
5. Remove the lumbar control from the seat cushion frame.



Installation Procedure





1. Install the lumbar control to the seat cushion frame.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws to the lumbar control.

Tighten the screws to 10 N.m (89 lb in).





3. Install the lumbar control cable to the lumbar control.
4. Install the outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Seat Cushion Outer Trim Panel Replacement - Front Seat) .
5. Install the front bucket seat. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .