Oil Pump: Service and Repair

Oil Pump Replacement

Removal Procedure
1. Remove the oil pan.





2. Remove the oil pump bolt.
3. Remove the oil pump and oil pump drive shaft.





4. Remove the crankshaft oil deflector nuts.
5. Remove the crankshaft oil deflector.
6. Inspect the oil pump driveshaft at both ends for rounding of the Corners.
7. Inspect the oil pump.

Installation Procedure

Important: Rotate the oil pump driveshaft as necessary in order to obtain the engagement with the oil pump drive.





1. Install the crankshaft oil deflector.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the crankshaft oil deflector nuts.
Tighten the nuts to 25 Nm (18 ft. lbs.).
3. Install the oil pump and oil pump drive shaft.





4. Install the oil pump bolt.
Tighten the oil pump bolt to 41 Nm (30 ft. lbs.).
5. Install the oil pan.