Fuel Gage Inaccurate or Inoperative
FUEL GAGE INACCURATE OR INOPERATIVEDIAGNOSTIC AIDS
- Ensure that the fuel level is in the same range as the customer concern.
- Refer to Fuel Level Specifications in order to verify the correct fuel level sender readings. The Fuel Level (%) parameter is available on the scan tool in the PCM EVAP data list.
TEST DESCRIPTION
Steps 1-2:
Steps 3-4:
Steps 5-10:
Steps 11-13:
The number(s) below refer to the step number(s) on the diagnostic table.
3. This step tests for a high resistance in the signal circuit and the low reference circuit of the fuel level sender.
13. DTCs will be set in the PCM when you perform this diagnostic table.