Vent Hose Assembly Replacement

Vent Hose Assembly Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Release the vent hose clamp (1) from the extension housing assembly.
3. Disconnect the vent hose (2) from the retaining bracket on the transfer case assembly.
4. Remove the vent hose from the extension housing assembly vent tube by carefully twisting the hose.

Installation Procedure
1. Install the vent hose to the extension housing assembly vent tube.





2. Connect the vent hose (2) to the retaining bracket on the transfer case assembly.
3. Install the vent hose clamp (1) to the extension housing assembly.
4. Lower the vehicle.