Oil Pump: Service and Repair
Oil Pump ReplacementRemoval Procedure
1. Remove the engine front cover.
2. Remove the oil pump cover bolts.
3. Remove the oil pump cover.
4. Mark the inner and the outer gears in relation to the oil pump housing.
5. Remove the inner and the outer oil pump gears.
6. Remove the oil pump pressure relief valve plug.
7. Remove the oil pump pressure relief valve and the spring.
Installation Procedure
1. Install the oil pump pressure relief valve and the spring.
NOTICE: Refer to Fastener Notice in Service Precautions.
Service Precautions
2. Install the oil pump pressure relief valve plug.
Tighten the oil pump pressure relief valve to 14 Nm (124 inch lbs.).
3. Install the oil pump outer and inner gears as removed.
4. Install the oil pump cover.
5. Install the oil pump cover bolts.
Tighten the oil pump cover bolts to 10 Nm (89 inch lbs.).
6. Install the front cover.