Front

Transfer Case Speed Sensor Replacement- Front (Trail Blazer, Envoy, Rainier, Bravada)

Removal Procedure





1. Raise the vehicle.
2. Remove the fuel tank shield, if equipped.
3. Remove the transfer case front speed sensor electrical connector.





4. Remove the transfer case front speed sensor.

Installation Procedure

Notice: Refer to Fastener Notice in Cautions and Notices.





1. Install the transfer case front speed sensor.
^ Tighten the speed sensor to 17 Nm (13 ft. lbs.).





2. Install the transfer case front speed sensor electrical connector.
3. Install the fuel tank shield, if equipped.
4. Lower the vehicle.