Onstar Microphone Replacement

ONSTAR(R) MICROPHONE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the overhead console.
2. Disconnect the microphone electrical connector to the OnStar(R) microphone (1).




3. If only the microphone removal is required, disengage the quick release tab (1) and remove the OnStar(R) microphone from the overhead console.
4. If removing the mounting bracket is required, remove the 2 retaining screws to the OnStar(R) microphone and remove the bracket from the overhead console.

INSTALLATION PROCEDURE




1. If installation of the mounting bracket is required, install the mounting bracket to the overhead console.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the 2 OnStar(R) microphone retaining screws.

Tighten
Tighten the screws to 0.8 N.m (7 lb in).

3. Install the microphone to the mounting bracket ensuring the quick release tab (1) is fully seated.




4. Connect the electrical connector to the OnStar(R) microphone (1).
5. Install the overhead console.