Mode Door
MODE DOOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the I/P carrier.
2. Remove the screws from the mode actuator.
3. Remove the mode actuator.
4. Remove screws in order to separate the defroster/mode outlet cover (2) from the HVAC module assembly (1).
5. Remove the mode door (1) from the heater module.
INSTALLATION PROCEDURE
1. Install the mode door (1) to the HVAC module assembly.
2. Install the defroster/mode outlet cover.
3. Install the defroster/mode outlet cover screws to the HVAC module assembly (1).
4. Install the screws to assemble the defroster/mode outlet to the HVAC module assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
Vehicle Damage Warnings
Tighten
Tighten the screws to .....1.9 N.m (18 lb in).
5. Install the mode actuator.
6. Install the screws to the mode actuator.
Tighten
Tighten the screws to .....1.9 N.m (18 lb in).
7. Install the I/P carrier.