Headlamp: Service and Repair

Headlamp Replacement (Rainier)

Removal Procedure

1. Open and support the hood.






2. Pull up on the retaining tabs (1) in order to remove the headlamp assembly from the headlamp panel.
3. Disconnect the headlamp electrical connector (2) from the headlamp assembly.
4. Remove the park/turn socket (3) from the headlamp assembly.
5. Remove the headlamp assembly from the headlamp panel.

Installation Procedure






1. Position the headlamp assembly to the headlamp panel.
2. Index and seat the tabs on the park/turn socket (3) to the headlamp assembly.
3. Connect the headlamp electrical connector (2).
4. Align and install the 4 locator pins on the back of the headlamp assembly into the retaining tab holes.
5. Push down on the retaining tabs (1) in order to lock the headlamp assembly into the headlamp panel.
6. Close the hood.