Bracket Replacement - Console Floor

Bracket Replacement - Console Floor

Removal Procedure

1. Remove the front floor console. Refer to Console Replacement - Front Floor (Aztek) (Console Replacement - Front Floor)Console Replacement - Front Floor (Rendezvous) (Console Replacement - Front Floor) .




2. Remove the upper bolts (2) from the IP.
3. Remove the lower nuts (1) from the floor.
4. Remove the front floor console bracket from the floor.



Installation Procedure





1. Align the front floor console bracket to the floor.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the lower nuts (1) to the front floor console bracket.

Tighten the nuts to 10 N.m (89 lb in).

3. Install the upper bolts/screws (2) to the IP.

Tighten the bolts/screws to 2.5 N.m (22 lb in).

4. Install the front floor console. Refer to Console Replacement - Front Floor (Aztek) (Console Replacement - Front Floor)Console Replacement - Front Floor (Rendezvous) (Console Replacement - Front Floor) .