Engine Support Fixture

Engine Support Fixture

^ Tools Required
- J 28467-34 Lift Hook Wing Nut and Washer (2)
- J 28467-6A Bracket Assembly (2)
- J 28467-7A Bolt Hook (2)
- J 28467-500 Engine Support Fixture
- J 28467-B Side Rail Support Bracket

Installation Procedure

Important: Supplemental support provided near the bottom of the transmission will be required to prevent the powertrain from rotating if the frame is lowered or removed.

1. Remove the engine mount struts.





2. Install a J 28467-B and retention pin to each end of the J 28467-500 beam (2).





3. Position the J 28467-B to the left and right side inner fender rails in order to install the J 28467-500.





4. Assemble the following to create 2 lift hook assemblies as shown:
^ J 28467-34
^ J 28467-6A
^ J 28467-7A





5. Install the 2 lift hook assemblies (1) to the J 45057-2 (2).
6. Install the engine mount strut nuts and bolts to the strut brackets.





7. Install the lift hook assemblies to the engine mount strut bolts as shown.
8. Gently tighten the J 28467-34 lift hook wing nuts.